Build Them Right

Using our Quick-Connect® style fittings with automatic-locking jaws and our bulk cable you can build your assemblies in the field. The cable end is simply inserted into the fitting and the spring-loaded one-way jaws grab and lock on. If necessary, a reusable release tool can be used to disengage and remove or readjust the fitting.

CableRail fittings fixed end tension adjustment

Fittings and Bulk Cable

 

All fittings and cables are manufactured from high-quality 316-grade stainless steel for weather-tough durability, ultra-low maintenance, and lasting beauty.

 

Bulk Cable – 1/8″ diameter 1×19 cable construction is available in various lengths for use with CableRail fittings.

 

Lengths:

 

Length Part #
100-ft #5100
250-ft #5250
500-ft #5500
Image
Quick-Connect® Fittings
quick connect lag

Quick-Connect® Lag

 

Fixed end fitting that screws into the face of a post or wall using the included hanger bolt with lag thread. Includes 2-in bolt for wood posts and 2 ½-in bolt for wrapped or composite-sleeved wood posts.

 

9905DL-PKG

quick connect lag tensioner

Quick-Connect® Lag Tensioner

 

Lag fitting with a special swiveling body that allows ³/4-in of take up for cable tensioning. Includes same hanger bolts as Lag fitting.

 
 

9910DL-PKG

quick connect pivot

Quick-Connect® Pivot

 

Fixed end fitting that screws into the face of a post or wall using the included hanger bolt with lag thread. 180º pivot range allows for angled stair terminations. Includes 2-in bolt for wood posts and 2 ½-in bolt for wrapped or composite-sleeved wood posts.

 

9915DL-PKG

quick connect pivot tensioner

Quick-Connect® Pivot Tensioner

 

Pivot fitting with a special swiveling body that allows ³/4-in of take up for cable tensioning. 180º pivot range allows for angled stair terminations. Includes 2-in bolt for wood posts and 2 ½-in bolt for wrapped or composite-sleeved wood posts.

 

9916DL-PKG

fittings and bulk cable for metal frames quick connect surface mount

Quick-Connect® Surface Mount

 

Fixed end fitting that attaches to the face of a post or wall with the included screws or bolts. 130° pivot range allows for angled stair terminations. Includes 2-in lag screws for wood posts (½-in bolts for metal posts sold separately).

 

9903DL-PKG

fittings and bulk cable for wood frames quick connect surface mount tensioner

Quick-Connect® Surface Mount Tensioner

 

Surface Mount fitting with a special swiveling body that allows ³/4-in of take up for cable tensioning. Includes same hanger bolts as Surface Mount fitting.

 

9913DL-PKG

Additional Components
Intermediate Pickets (Square Aluminum)
Intermediate Pickets (Round Stainless Steel)
Protector Sleeves
Beveled Washers (Stainless Steel)
Tools
Cable Cutters
Quick-Connect® Release Tool
Cable Lacing Needle
Tension Gauge
Multi-Tool
Tensioning Tool Kit
Image
Wrench Wheel
Image
Hanger Bolt Tool
Image
Stainless Steel Cleaner Kit
Installation Documents
  • CableRail Wood Frame Requirements

    PDF
  • PDF
  • CableRail Quick-Connect® Fittings

    PDF
  • PDF
  • CableRail Kits Installation in Wood or Metal Frames

    PDF
  • PDF
FAQs
  • Can fittings and cable be purchased separately for fabricating assemblies in the field?

    Yes. We offer a wide selection of cables and fittings, many of which include our Quick-Connect® automatic locking-jaw technology, all engineered for easy installation in the field. See our  CableRail Fittings page for more information.

  • Can I cut the cables with a pair of wire cutters?

    No. Wire cutters will crush the cable and cause you significant frustration during installation. You should use cable cutters that are designed to cleanly shear the cable (see our Cable Cutters #2972-PKG). An electric grinder with a cut-off disk is another option that works very well for trimming both the cable and the excess threads on the Threaded Terminal fittings.

  • What is Feeney CableRail made of?

    All CableRail cables and fittings are made from high quality 316-grade stainless steel (also referred to as “marine grade”). This high-quality stainless steel offers beauty, superior weather durability, high strength and low maintenance characteristics that far exceed other traditional railing infill materials.

  • What will I need to maintain Feeney CableRail cables?

    CableRail cables and fittings are made from high quality 316-grade stainless steel for weather-tough durability and very low maintenance. However, while rare, corrosion or staining may sometimes occur on stainless steel due to airborne contaminants, humidity, and other factors, especially in coastal environments. Periodic maintenance is recommended. Wipe the cables with soap and warm water and use either a rag or non-abrasive synthetic pad to keep them clean and free of salt or other contaminates. We also recommend our Stainless Steel Cleaner & Protectant Kit (#5064-PKG) with Feeney SteelProtect™ and SteelRenewal™. The SteelProtect™ product provides a protective layer that can help maintain the performance and luster of the cables and fittings. If any staining does occur, biodegradable SteelRenewal™ cleaning gel effectively removes staining and other contaminants without scrubbing. Simply apply, allow it to sit, and then rinse it off. Be sure to also check the cables periodically for proper…

  • What’s the longest cable run I can have?

    When using our standard CableRail Kits, we recommend that straight runs of cable (no corners or bends) should not exceed 70 feet. Runs with corner bends (using double corner posts) should not exceed 40 feet and should not have more than two corners per run. Maximum run lengths may be less if using CableRail Conceal Kits or other Quick-Connect® or swage-type fittings. Give us a call to confirm the maximum run lengths for your specific project.

  • Why would I need to use a Cable Lacing Needle?

    The CableRail cable is made up of 19 individual wires twisted together. Sometimes, these individual wires can splay open and snag when lacing the cable ends through the post holes. The reusable Cable Lacing Needle slides onto the end of the cable and keeps all of the wires contained within the needle, which allows you to quickly guide the cable through the holes without snagging.

  • What happens if I need to remove the Quick-Connect® Inset fitting from the cable?

    Should this occur, use our Quick-Connect® Release Tool (sold separately, #3128-PKG) to unlock the jaws on the Quick-Connect® Inset fitting.

Let’s Start a Conversation

Contact Feeney today and we will answer your questions, as well as get you to the right dealer.