Sleekline Ball End Turnbuckle

Sleekline Ball End Turnbuckle
Inserts through drill hole or slot in the end post and is secured with a screw-on ball. Ball pivots to allow angled terminations without beveled washers. Typically paired with Fixed Ball End or another Sleekline Ball End Turnbuckle.

Sleekline turnbuckles are best suited for attaching to the cable in the field using the CableCrimp™ style fittings and a CableCrimp™ Crimper tool. See the Sleekline Install PDF for instructions to assemble the Sleekline series of fittings.

Part# Swage CableØ A close L close (open) *DrillØ
3345 M 1/8" 5/8" 3-3/8" 1/4" 8-1/8" (9-3/4") 5/16"
3346 M 3/16" 5/8" 3-3/8" 1/4" 8-1/8" (9-3/4") 5/16"
3350 C 1/8" 5/8" 3-3/8" 1/4" 8-1/8" (9-3/4") 5/16"
3351 C 3/16" 5/8" 3-3/8" 1/4" 8-1/8" (9-3/4") 5/16"

M=Machine Swage, C=CableCrimp™ Hand Swage

*Ball can be slightly recessed into post by counterboring with 9/16" drill.

DrillØ is the recommended drill hole size for attaching fittings to end posts. Drill hole diameters for the intermediate posts may be different than the fitting attachment posts; please call our sales department at 1-800-888-2418 to confirm proper hole sizes. See the Recommended Drill Hole Charts.