Ball End Turnbuckle

 
Ball End Turnbuckle
Inserts through a drill hole or slot in end post and is secured with a screw-on ball. Ball pivots to allow angled terminations without beveled washers. Typically paired with Fixed Ball End or another Ball End Turnbuckle.
Part# Swage CableØ Thread A* L close (open) DrillØ**
3340 M 1/8" 1/4-28 5/8" 1-1/4" 7-1/2" (10-1/2") 5/16"
3341 M 3/16" 1/4-28 5/8" 1-1/4" 8" (11") 5/16"
3342 M 1/4" 5/16-24 5/8" 2-7/8" 10-1/4" (14") 3/8"
3343 C 1/8" 1/4-28 5/8" 1-1/4" 8-1/4" (11-1/4") 5/16"
3344 C 3/16" 1/4-28 5/8" 1-1/4" 8-1/2" (11-1/2") 5/16"

M=Machine Swage, C=CableCrimp™ Hand Swage

  *Longer shaft lengths available.
**Ball can be slightly recessed into post by counterboring with 9/16" drill.

DrillØ is the recommended drill hole size for attaching fittings to end posts. Drill hole diameters for the intermediate posts may be different than the fitting attachment posts; please call our sales department at 1-800-888-2418 to confirm proper hole sizes. See the Recommended Drill Hole Charts.