Build Them Right

Using our Quick-Connect® style fittings with automatic-locking jaws and our bulk cable you can build your assemblies in the field. The cable end is simply inserted into the fitting and the spring-loaded one-way jaws grab and lock on. If necessary, a reusable release tool can be used to disengage and remove or readjust the fitting. Every cable line must have at least one Tensioner fitting in order to tension a line. This diagram shows the 2 common fitting positions.

CableRail fittings fixed end tension adjustment

Bulk Cable

 

All fittings and cables are manufactured from high-quality 316-grade stainless steel for weather-tough durability, ultra-low maintenance, and lasting beauty.

 

Bulk Cable – 1/8″ diameter 1×19 cable construction is available in various lengths for use with CableRail fittings.

 

Lengths:

 

Length Part #
100-ft #5100
250-ft #5250
500-ft #5500
Image
Fittings That Attach to the Inside Face of a Post or Wall

Quick-Connect® Jaw

Quick-Connect® fixed end fitting for CableRail, attaches to post face with removable clevis pin.

9901-PKG

Learn More

 

Quick-Connect® Jaw Tensioner

 

Quick-Connect® tension adjustment fitting for CableRail, attaches to post face with removable clevis pin. Special swiveling body to adjust tension.

9912-PKG

Learn More

 

Quick-Connect® Jaw Turnbuckle

 

Quick-Connect® tension adjustment fitting for CableRail, attaches to post face with removable clevis pin.

9900-PKG

Learn More

 

Quick-Connect® Surface Mount

 

Quick-Connect® fixed end fitting for CableRail, attaches to post face using lag screws, bolts, or button head lag screws.

9903W-PKG

Learn More

 

Quick-Connect® Surface Mount Turnbuckle

Quick-Connect® tension adjustment fitting for CableRail, attaches to post face using lag screws, bolts, or button head lag screws.

9902W-PKG

Learn More

 

Quick-Connect® Surface Mount Tensioner

 

Quick-Connect® tension adjustment fitting attaches to post face using lag screw bolts, or button head lag screws. Special swiveling body to adjust tension.

9913W-PKG

Learn More

 

Quick-Connect® Expansion Anchor Tensioner 

 

Quick-Connect® tension adjustment fitting for anchoring CableRail into masonry wall or posts.

9914-PKG

Learn More

 

Quick-Connect® Expansion Anchor

 

Quick-Connect® fixed end fitting for anchoring CableRail into masonry wall or posts.

9906-PKG

Learn More

 

Fittings That Attach to the Outside Face of a Post

Quick-Connect® Threaded Terminal

 

Quick-Connect® tension adjustment fitting used to terminate cables when you have access to the outside of the face of the post.

9904-PKG

Learn More

 

Quick-Connect® Inset Fitting

 

Quick-Connect® fixed end fitting for attaching cables through end posts.

3146W-PKG

Learn More

 

Quick-Connect® Internal Thread Adjuster

 

Quick-Connect® tension adjustment fitting, inserts through a drill hole in end post and is secured and adjusted using a bolt and washer (included).

9907-PKG (1-1/2″ Bolt)

9908-PKG (2″ Bolt)

9909-PKG (3″ Bolt)

Learn More

 

Machine Swage & CableCrimp Fittings

Machine swage fittings are attached to the cable at our factory using a hydraulic cold forming press. The swage shank portion of the fitting is pressed on to the end of the cable and has a uniform hexagonal shape when finished. Assemblies using Machine Swage type fittings are fabricated to you exact lengths in our factory and then shipped ready to install.

 

CableCrimp style fittings are attached to the cable by hand in the field using a special CambleCrimp Hand Crimper tool. After proper crimping, the fitting will display several evenly spaced compression marks where the tool was engaged. Most 1/8” and 3/16” cable fittings are available in CableCrimp styles.

Fittings That Attach to the Inside Face of a Post or Wall

Fixed Jaw End

Fixed end fitting for CableRail, attaches to post face with removable clevis pin. Machine swaged or hand crimped.

Learn More

 

Jaw Turnbuckle

 

Tension adjustment fitting for CableRail, attaches to post face with removable clevis pin. Machine swaged or hand crimped.

Learn More

 

Sleekline Jaw Turnbuckle

 

Tension adjustment fitting for CableRail, attaches to post face with removable clevis pin. Best suited for CableCrimp swaging. Also available Machine Swaged.

Learn More

 

Fixed Surface Mount

 

Fixed end fitting for CableRail, attaches to post face using lag screws, bolts, or button head lag screws. Machine swaged or hand crimped.

 

Learn More

 

Sleekline Surface Mount Turnbuckle

 

Tension adjustment fitting for CableRail, attaches to post face using lag screws, bolt or button head lag screws. Best suited for CableCrimp swaging. Also available Machine Swaged.

Learn More

Surface Mount Turnbuckle

 

Tension adjustment fitting for CableRail, attaches to post face using lag screws, bolts, or button head lag screws. Machine swaged or hand crimped.

Learn More

Fixed Lock Toggle

 

Tension adjustment fitting for CableRail, attaches to post face with removable clevis pin. Best suited for CableCrimp swaging. Also available Machine Swaged.

Learn More

Fittings That Attach to the Outside Face of a Post

Internal Thread Adjuster

 

Inserts through a drill hole in end post and is secured and adjusted using a bolt and washer (included).

Fixed Ball End

 

Fixed end fitting, inserted through a drill hole in the end post and secured with a screw-on ball. Machine swaged or hand crimped.

Learn More

 

End Ball Turnbuckle

 

Tension adjustment fitting, through a drill hole in the end post and secured with a screw-on ball. Machine swaged or hand crimped.

Learn More

 

Sleekline Ball End Turnbuckle

 

Tension adjustment fitting, through a drill hole in the end post and secured with a screw-on ball. Best suited for CableCrimp swaging. Also available Machine Swaged.

Learn More

 

Fixed Cap End

 

Fixed end fitting, inserted through a drill hole in the end post and secured with a screw-on end cap. Machine swaged or hand crimped.

Learn More

 

Cap End Turnbuckle

 

Tension adjustment fitting, inserted through a drill hole in the end post and secured with a screw-on end cap. Machine swaged or hand crimped.

Learn More

 

Sleekline Cap End Turnbuckle

 

Tension adjustment fitting, inserted through a drill hole in the end post and secured with a screw-on end cap. Best suited for Cable Crimp swaging. Also available Machine Swaged.

Learn More

 

Fixed Button Head

 

Single piece fitting with non-removable, low profile rounded head. Head rests against the outside face of the post.

Learn More

 

Threaded Terminal

 

CableRail fitting for attachment through post to outside face. Machine swaged or hand crimped.

Learn More

 

Fittings Positioned in the Middle of an Assembly

In-Line Turnbuckle

 

Used in the middle of a cable assembly for additonal tensioning on long run or where and tensionsing is not feasible or desired.

Learn More

 

Pairing Image to Reference for Fittings Above
Additional Components
Intermediate Pickets (Square Aluminum)
Intermediate Pickets (Round Stainless Steel)
Protector Sleeves
Beveled Washers (Stainless Steel)
Tools
Cable Cutters
Quick-Connect® Release Tool
Cable Lacing Needle
Tension Gauge
CableRail Tensioning Tool
Multi-Tool
Wrench Wheel
Hanger Bolt Tool
Resources
person installing cable railing for wood frame
Technical Documents
  • CableRail Quick-Connect® Fittings

    PDF
  • PDF
  • CableRail Kits Installation in Wood or Metal Frames

    PDF
  • PDF
  • Quick-Connect® Inset

    PDF
  • PDF
  • Quick-Connect® Inset – Level Termination

    PDF
  • PDF
  • Quick-Connect® Inset – Stair Termination

    PDF
  • PDF
FAQs
  • Can fittings and cable be purchased separately for fabricating assemblies in the field?

    Yes. We offer a wide selection of cables and fittings, many of which include our Quick-Connect® automatic locking-jaw technology, all engineered for easy installation in the field. See our  CableRail Fittings page for more information.

  • Can I cut the cables with a pair of wire cutters?

    No. Wire cutters will crush the cable and cause you significant frustration during installation. You should use cable cutters that are designed to cleanly shear the cable (see our Cable Cutters #2972-PKG). An electric grinder with a cut-off disk is another option that works very well for trimming both the cable and the excess threads on the Threaded Terminal fittings.

  • What is Feeney CableRail made of?

    All CableRail cables and fittings are made from high quality 316-grade stainless steel (also referred to as “marine grade”). This high-quality stainless steel offers beauty, superior weather durability, high strength and low maintenance characteristics that far exceed other traditional railing infill materials.

  • What will I need to maintain Feeney CableRail cables?

    CableRail cables and fittings are made from high quality 316-grade stainless steel for weather-tough durability and very low maintenance. However, while rare, corrosion or staining may sometimes occur on stainless steel due to airborne contaminants, humidity, and other factors, especially in coastal environments. Periodic maintenance is recommended. Wipe the cables with soap and warm water and use either a rag or non-abrasive synthetic pad to keep them clean and free of salt or other contaminates. We also recommend our Stainless Steel Cleaner & Protectant Kit (#5064-PKG) with Feeney SteelProtect™ and SteelRenewal™. The SteelProtect™ product provides a protective layer that can help maintain the performance and luster of the cables and fittings. If any staining does occur, biodegradable SteelRenewal™ cleaning gel effectively removes staining and other contaminants without scrubbing. Simply apply, allow it to sit, and then rinse it off. Be sure to also check the cables periodically for proper…

  • Can you pass the Cable Lacing Needle through the Quick-Connect® Inset fitting?

    No! The diameter of the Cable Lacing Needle is too large and will become wedged in the Quick-Connect® Inset fitting, rendering the fitting useless. Be sure to remove the Cable Lacing Needle and cleanly trim the end of the cable before inserting the bare cable into any Quick-Connect® style fitting.

  • What’s the longest cable run I can have?

    When using our standard CableRail Kits, we recommend that straight runs of cable (no corners or bends) should not exceed 70 feet. Runs with corner bends (using double corner posts) should not exceed 40 feet and should not have more than two corners per run. Maximum run lengths may be less if using CableRail Conceal Kits or other Quick-Connect® or swage-type fittings. Give us a call to confirm the maximum run lengths for your specific project.